Personal Protection
PPE Accountability
UAE PPE requirements under ADOSH-SF (formerly OSHAD) and Dubai Municipality, mandatory baseline PPE, task-specific PPE, heat stress compliance, and inspection procedures.
Learning Objectives
- List the five items of mandatory baseline PPE for UAE construction sites.
- Identify task-specific PPE for hot work, confined space, chemical handling and working at height.
- Inspect a harness, helmet and safety footwear before use.
- Understand ADOSH-SF CoP 2.0 and Dubai Municipality PPE requirements.
- Escalate defective or missing PPE through the correct channel.
Training Video
ProPreview
9-minute video
Unlock this training video
The first 3 modules are free. Upgrade to Pro to watch every module, save progress, and issue certificates.
Upgrade to ProModule Content
1. Baseline PPE
Every worker on a UAE construction site must wear, as a minimum: hard hat (EN 397), safety spectacles (EN 166), high-visibility vest (EN ISO 20471 Class 2), safety footwear with steel toe and midsole (EN ISO 20345 S3), and cut-resistant gloves (EN 388). No exceptions for visitors, drivers or delivery staff inside the fenceline.
2. Task-Specific PPE
Hot work: leather apron, welding shield, flame-retardant coveralls. Working at height: full-body harness with dual lanyards (EN 361/EN 355). Chemical handling: nitrile gloves, chemical splash goggles, respirator per SDS. Confined space: gas monitor, escape SCBA, harness with retrieval line. Noise > 85 dB(A): plugs plus muffs (double protection).
3. Heat Stress PPE
In WBGT Red/Black conditions, standard cotton coveralls are replaced with breathable, moisture-wicking fabrics. Cooling vests with phase-change inserts are issued for continuous outdoor tasks. Wide-brim hard hat covers (neck flap) protect the neck from direct sun. Reflective PPE is mandatory for night shifts.
4. Inspection Before Use
Hard hat: check shell for cracks, harness for wear, expiry date (max 5 years from manufacture, 2 years in service). Harness: check webbing for cuts/burns, D-rings for deformation, stitching, buckle function, tag legible. Footwear: sole integrity, toe cap intact, no chemical contamination. Any defect = quarantine + report + replace.
5. Regulatory Basis
ADOSH-SF CoP 2.0 (PPE) and Dubai Municipality CoP Section 4 require the employer to provide PPE free of charge, train workers in its use, replace it when defective, and enforce its use. Refusal to wear PPE is a Category A violation with immediate site removal and disciplinary action.
6. Reporting Defective PPE
Stop work, quarantine the item with a red tag, report to supervisor and store keeper, complete a defective equipment log, and receive a replacement before returning to work. Never repair PPE on site — replacement only. Reused/repaired PPE has been cited in multiple UAE fatality investigations.
Knowledge Assessment
1. Which is NOT part of UAE mandatory baseline PPE?
2. Hard hats must be replaced no later than:
3. A full-body harness must comply with:
4. Noise exposure above 85 dB(A) requires:
5. Defective PPE must be:
6. ADOSH-SF CoP 2.0 requires the employer to:
7. For continuous outdoor tasks in WBGT Red conditions, the recommended additional PPE is:
8. Refusal to wear PPE on a UAE site typically results in:
9. Cut-resistant gloves must comply with:
10. Safety footwear for construction must be at least:
Certificate
Pass the quiz (8 / 10) to unlock your certificate.
Acknowledgement
By signing below, you confirm you have watched the training video, understood the material, and will apply these controls on site.